Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

hcr
New Member

lwapp, 1231G + ios ver 12.4(3g) ja2

Hi, Are there anybody here that have suceeded in upgrading a 1231G with the firmware from the controller version 4.1.185 (ap sw 12.4(3g)ja2) ????

Best regards Henrik

4 REPLIES
Hall of Fame Super Red

Re: lwapp, 1231G + ios ver 12.4(3g) ja2

Hi Henrik,

I am sorry if I have misunderstood your question, but if you are trying to upgrade an Autonomous AP (1231) to LWAPP using the LWAPP Upgrade tool you first need to load an image like 12.3(11)JA on the AP.

Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode

http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161111

Hope this helps!

Rob

hcr
New Member

Re: lwapp, 1231G + ios ver 12.4(3g) ja2

Hi you have misunderstood the ?. Our 1231 ap's have been operating as lwapp for the last 4 months, but due to problems with roaming between intermec handhelds, we need to lift our controllers to ver 4.1.185, and it seems that i cant get the 1231 to load the new firmware

hcr
New Member

Re: lwapp, 1231G + ios ver 12.4(3g) ja2

Problem solved. :), the controller had lost the ap policies regarding the upgraded 1231 ap's so they wouldnt join.

Henrik

Hall of Fame Super Red

Re: lwapp, 1231G + ios ver 12.4(3g) ja2

Hi Henrik,

Thanks for posting back with your resolution! 5 points for your good work and follow-up :)

Take care,

Rob

543
Views
5
Helpful
4
Replies