02-17-2010 01:43 AM - edited 07-03-2021 06:31 PM
i have upgraded wism controllers to software version 6.0. controller 2 is working fine - i can ping, telnet to it from anywhere on my network. on the other hand controller 1 is booting fine and lwapp are associating with the controller but are failing to lease IP addresses from the dhcp server. i can not ping the controller from the network and the controller is also failing to ping the lwapp.
--ronnie
02-17-2010 09:51 AM
A few questions:
02-18-2010 12:04 AM
hi,
[wism on catalyst 6509]
1. the gateway and the management interface are all set correctly. i can ping other subnets on my network from this controller, but i can not ping the dhcp server from the controller. i cannot also ping the default gateway of the subnet where the dhcp server is stting.
2. i can ping the controller from the core switch
3. from the controller i can ping AP that are associated on the second controller, but cannot ping APs associated with this controller
4. no internal firewall, no ACLs blocking traffic to the subnet.
02-17-2010 09:10 PM
Can you post your config ?
02-17-2010 11:49 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide