Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

lwapp to autonomous

CISCO LWAPP TO AUTONOUMOUS MODE CONFIGURATION:

(HERE WE USED CISCO AIRONET 1131 AG)

1->DELETE THE OLD FLASH FILE FROM THE CISCO WIFI

Connect Ethernet cable and console cable.

  #delete

  -It will ask to delete what , then delete the old flash file

 -NOTE: Now we can only able to get into the router’s recovery mode because we erased old flash

  -EX for recovery mode----à ap:

2->DOWNLOAD THE TFTP32 APPLICATION SOWTWARE(run tftp server on 10.0.0.2/24)

 - Set ip for the pc which we using as 10.0.0.2/24

  -Subnet: 255.255.255.0

  -Default gateway:10.0.0.10

  -Run the tftp to download the IOS image from the working cisco router, follow step (3)

3->DOWNLOAD CORRECT IOS IMAGE FROM THE OTHER USING CISCO ROUTER(SAME 1130 INCASE)    else  in CISCO.COM

       To download ios to tftp:

       NOTE:ALWAYS CONNECT ETHERNET CABLE WITH PC TO WIFI TO TRANSFER IOS

        Log into the working cisco router and follow the below mentioned command to copy ios to tftp

      #archive upload-sw /version c1130-k9w7-mx.124-21a.JY  tftp://10.0.0.2/ c1130-k9w7-mx.124-21a.JA1.tar

        Note: don’t ever forget to give version above command

      -now it will upload the CORRECT  image ios file into TFTP path.

      - when you checked the path in the tftp server it shows the file name as .tar.tar twice at the last

       So simply erase one .tar( Make it with only .tar)

 

 

 

 

4->ENTER  CISCO WIFI ROUTER  THROUGH CLI

       Note: ensure we can only able to work  in the recovery mode (EX: ap)

      ap: tftp_init

      ap: ether_init

      ap: flash_init

      ap: tar -xtract tftp://10.0.0.2/images/c1130-k9w7-mx.124-21a.JA1.tar flash:

     note:don’t ever forget to give /images , else it will prompt the error like (no such  file   directory found)

     now it will extract the image ios into the router

     ap:set

    BOOT=flash:/c1130-k9w7-mx.124-21a.JA1

     Note : don’t give extension as .tar

     NOW

   ap: reset 

    (in ap: mode we use reset for reload , instead of reload in wifi router)

   5->SIMPLY CONFIGURE IP AND GATEWAY TO USE THE ROUTER

 

 

 

 

 

 

 

 

 

80
Views
0
Helpful
0
Replies
CreatePlease login to create content