Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Macintosh and WPA2 Enterprise

Hi,

I have a few Macs that I can only use WPA2 Personal with against a 1131. I setup the Accesspoint as the RADIUS server, but I see nothing in the log files. WPA2 Personal works fine, but I don't want to use Open authentication.

I set it up exactly as per Cisco's documentation.

Any help would be appreciated.

9 REPLIES
Bronze

Re: Macintosh and WPA2 Enterprise

This is surely a configuration issue. Have a look at this document which explains how to configure the AP for WPA 2. Using this documentation reconfigure this setup and check if it works.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008054339e.shtml#pers

Community Member

Re: Macintosh and WPA2 Enterprise

Thanks,

This IS the document I started with, set it up identical, no connections, nothing even in the log file. Switched to WPA2 Personal all macs worked fine. I thought it's probably configuration too, but after following the setup instructions, and troubleshooting, I'm not so sure.

I'll try to troubleshoot some more and post here the results.

Blue

Re: Macintosh and WPA2 Enterprise

How's your Mac's "Internet Connect" set up?

Community Member

Re: Macintosh and WPA2 Enterprise

The Macs have been setup manually for Wireless access through the Access-point (no DHCP), no proxy, etc.

The connection via WPA2 Personal works fine, I think it's just a problem using RADIUS.

Community Member

Re: Macintosh and WPA2 Enterprise

I agree with yjdabear, you need to use "Internet Connect" to do the RADIUS part of the configuration.

Community Member

Re: Macintosh and WPA2 Enterprise

Matthias,

Maybe you could tell me where I can find the setup for Radius in Internet Connect? I set it up as per the document but remember I am using the Mac utilities for the Airport, not the Cisco client.

If you can show or tell me the exact Mac config that differs at all from that Cisco document, that would be great.

Cheers

Community Member

Re: Macintosh and WPA2 Enterprise

I don't know if you still need this, but if you open internet connect and then go to File -> New 802.1x connection, then it will give a place to set it up. Let me know if you need any other help.

Community Member

Re: Macintosh and WPA2 Enterprise

I have attatched images to show the setting it will as you for.

Community Member

Re: Macintosh and WPA2 Enterprise

Thanks,

I will give it another try...

297
Views
0
Helpful
9
Replies
CreatePlease to create content