Cisco WLSE makes its very easy to migrate to IOS. It gets the current config form the VxWorks AP as a part of the migration. Its got all the enterprsise features like scheduling the mirgation at certain time. But the hardware is a bit pricey. But with more than 1000+ APs it does provide ROI.
You want to be careful of migrating the 350s to IOS. There have been numerous posts and I have had first hand experience with the IOS code messing up the 350's Many times the IOS 350s rebooted themselves at random times, kicked clients off, and lost IP addresses.
I'll second that... My AP350 was pretty much useless after the IOS upgrade. The only cards that would hold an association were Cisco cards. None of my Orinoco Cards would work, forget Prism. My old Aironet cards caused the AP350 to crash... Forget IOS on the 350. And since you can't go back to VxWorks, it's pretty much a door stop after the upgrade.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...