Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Max number of the mobility member in mobility group at WISM

Hi all,

I have a customer buys 12 x WISM and build up a mobility, when I add the final WLC to mobility, it prompts that there mobility group has reached the max of mobility member, but the total member is 23, according the configuration guide, it should be allow to 24 member, do I hit some bug? My using version is 7.0.98.0, thanks.

Everyone's tags (2)
5 REPLIES
Hall of Fame Super Silver

Max number of the mobility member in mobility group at WISM

You should be able to have 24.. that is including the WLC itself on the list I believe.  If you do a show mobility summary from the CLI, does it only show 23?

-Scott
*** Please rate helpful posts ***
New Member

Max number of the mobility member in mobility group at WISM

Here is the output from console:

Multicast Mode .................................. Disabled

Mobility Domain ID for 802.11r................... 0xd4f0

Mobility Keepalive Interval...................... 10

Mobility Keepalive Count......................... 3

Mobility Group Members Configured................ 23

Mobility Control Message DSCP Value.............. 0

Hall of Fame Super Silver

Re: Max number of the mobility member in mobility group at WISM

Okay so that also verifies 23. Does this happen with all your WLC's by chance. I would just open a TAC case to see what they say.

Sent from my iPhone

-Scott
*** Please rate helpful posts ***
New Member

Max number of the mobility member in mobility group at WISM

Here is the finding of this case:

CSCtj97304    JMR1:Not able to add 24th mobiity membr when system mac is deleted/added

Symptom:
Not able to add the 24th member in the mobility group
Conditions:
When the entry with the system mac is deleted and added back.
Workaround:
Don't delete/add entry with the system mac
 

The fix has been integrated in 7.0.116.0 or later.

Hall of Fame Super Silver

Max number of the mobility member in mobility group at WISM

Thanks for the follow up!

-Scott
*** Please rate helpful posts ***
665
Views
5
Helpful
5
Replies
CreatePlease to create content