I have a fairly large wireless deployment and I have been looking for information regarding the total number of users supported per AP; as of yet I have not found any information other then marketing statements of "High Capacity". I am looking for 802.11G/B information regarding the total number of users supported using no auth, 802.1x, WEP, and WPA security configurations; this would be an indoor deployment. I would appreciate any information that could be provided.
This is a question that comes up all the time.As you can see from the answers in the links below,there are alot of factors that come into play.The consensus from everything I have read would be 20-30 users per AP depending on actual applications etc.Have a read for some great answers provided in this forum by some "hands on" experts:
It depends upon your users and application. In my warehouse I have one AP350 driving 45+ handheld RF scanners. The RF scanners are mostly 4800 cards and a few 350 cards. The traffic generated by each scanner is very light and the scanners are running at 1Mps therefore I can get that high of a client density and I still have room to add more.
The wireless network says it is 11Mps or 54Mps but you do not have that bandwidth. You have to account for the wireless overhead and wireless is running at half-duplex.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...