Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mechanical characteristics of MAR3200 cards

Hi,

I will use a MAR3200 in a subway environment. Only the FESMIC, MARC and MRPC will be inserted in the enclosure: the WMIC cards will be installed at each train extremity and the SMIC is not required. The allowed space is not huge and the enclosure I will design must be a small sized. I searched information about mechanical characteristics (size, fix points?) for these cards and the associated thermal plates. I am also interested by information about the connectors (type / reference, pins assignment?). Any information or link about these topics will be helpful.

Thanks by advance

Alain-Claude

4 REPLIES
New Member

Re: Mechanical characteristics of MAR3200 cards

On the radio card, there are two ultra-miniature coaxial connectors (U.FL connector) that are used to connect the coax cables between the WMIC and the external antenna connectors. Refer the following URL

http://cisco.com/en/US/products/hw/routers/ps272/products_technical_reference_chapter09186a008022b2e1.html

New Member

Re: Mechanical characteristics of MAR3200 cards

Hi Shabir,

Thanks for the answer. I know this doc but I need more detailed information about the mechanical characteristics of the MAR3200 cards to define the rack which they will be inserted in.

Best Regards,

Alain-Claude

Re: Mechanical characteristics of MAR3200 cards

The cards are PC104 standard, so your best bet is to check out the standards.

New Member

Re: Mechanical characteristics of MAR3200 cards

Thanks for the answer. Do you have any information about the connectors: location on the PC104 cards, pin assignment, type...

194
Views
0
Helpful
4
Replies