,Mesh AIR-CAP1552E-A-K9 Vlan Mappings for remote sites
I have 7 Mesh access points module: AIR-CAP1552-A-K9, I need that all the users for the WLAN's get local IP address for the remote site, how can I redirect wlan's to local Vlan, if someone knows I really need help.
Re: ,Mesh AIR-CAP1552E-A-K9 Vlan Mappings for remote sites
You can't is your 1552's are RAPs or MAPs. Only if your 1552's are in FlexConnect mode, which I don't think you want them to be. Traffic gets tunneled all the way back to the RAP so unless your bridging that vlan back to where the WLC/RAP is connected in the network, there is no way.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...