Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Mesh Configuration

Hi,

I have tried to configure some AP's as mesh AP's using WLC4402-12 running 4.1.192.35M (Mesh)software version, working along with Cisco document crn4119235M.

unfortunately i can't find the mesh tab under wireless->AP config...

is there any country restrictions regarding the mesh?

4 REPLIES
Anonymous
N/A

Re: Mesh Configuration

I think there is no such restrictions. This link lists the path to be used in the Web user interface to configure the mesh access point parameters.

http://www.cisco.com/en/US/docs/wireless/access_point/mesh/4.0/deployment/guide/config.html#wp1041750

Community Member

Re: Mesh Configuration

Well this is an old guide which instruct how to configure AP1020 and 1030 AP's (which were Airespace models).

I'm looking for how-to with AP1131 models...

Thx anyway

Silver

Re: Mesh Configuration

If the AP Mode is Local, there will be no Mesh TAB. You must change AP Mode to Bridge and apply the configuration. Keep in mind, when you do this, the AP will not join the controller if you have not added the MAC address.

http://www.ciscowireless.net/index.php?option=com_content&view=article&id=13:how-to-convert-a-1242-or-1131-ap-to-mesh&catid=6:mesh&Itemid=9

Community Member

Re: Mesh Configuration

Thanks, i will try to follow these steps and see what happens.

What about licensing? i read that you have to acquire a license for the controller in order to work in indoor mesh technology.

382
Views
0
Helpful
4
Replies
CreatePlease to create content