Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

migrating 1240 to lwapp

I converted a 1240 ap from autonoumous to lwapp using the upgrade tool. The one step I missed was to configure the .csv file to obtain a hash key for the ap so I can add to the controller. Is there a way I can do this manually.

2 REPLIES
Hall of Fame Super Red

Re: migrating 1240 to lwapp

Hi Musumani,

This is possible :) Have a look at the methods in this good doc;

Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs

http://www.cisco.com/en/US/products/ps7206/products_configuration_example09186a00806a426c.shtml

Hope this helps!

Rob

Hall of Fame Super Silver

Re: migrating 1240 to lwapp

When I have converted an Autonomous 1242 to LWAPP, I have never had to enter the SSC. Basically the .csv file did not have anything in it. Only on the older AP's did I have a SSC to add. Just try to have to AP join the WLC. If you believe you need the SSC, then just convert back to IOS and convert back to LWAPP.

-Scott
*** Please rate helpful posts ***
243
Views
0
Helpful
2
Replies