i have a doubt about Mobility anchor here is a descrption if my topology
central controller (anchor ) ssid Guest is in US Corp office and for branches i have 1 wlc per city, branch-1. branch-2, each city has around 300 guest clients so a subnet /23 (512) is needed to support the clients.
my question is if at the anchor wlc (central) can i use ap groups to assign a different subnet to each branch office? if so, will the anchor controller attached to the management interface?
There is a feature called "foreign mapping" you can use with Auto-Anchor solution. This will help you to assign different interface (or interface group) for each branch guest traffic. This is the best solution to achieve what you want
Here is a example of how you can configure this feature.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...