Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

mobility group

I have to create a mobility group for a WLC 2100 and WLC 2006. Do I have to create this group on both controllers or just on one?

Thanks...

1 REPLY
Hall of Fame Super Red

Re: mobility group

Hi Greg,

Each controller is configured with a list of the other members of the mobility group. Whenever a new client joins a controller, the controller sends out a unicast message to all of the controllers in the mobility group. The controller to which the client was previously connected passes on the status of the client. All mobility exchange traffic between controllers is carried over an LWAPP tunnel.

From these excellent docs;

http://www.cisco.com/en/US/docs/wireless/wcs/4.1/configuration/guide/wcsmobil.html#wp1090318

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40mobil.html

Hope this helps!

Rob

280
Views
5
Helpful
1
Replies