Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Mobility Issues with Guest VLAN

I have two sites, one in England, one in Houston. The site in England has a 4404

(10.160.104.187), running against an anchor controller in Houston (10.32.210.251), that

provides internet access for guest users, running 4.2.112.0. Up until the last few days,

it worked without issue. Now, the control channel will not come up, although the data

channel is fine.

From the Houston 4404:

(uscy1wc-air011) >mping 10.160.104.187

Send count=3, Receive count=0 from 10.160.104.187

(uscy1wc-air011) >show msglog

Message Log Severity Level ...................... VERBOSE

00:0b:7d:0f:38:75 Ignoring Announce, client record for

not found

Wed Sep 17 15:54:57 2008: Mobility packet received from:

Wed Sep 17 15:54:57 2008: 10.160.104.185, port 16666

Wed Sep 17 15:54:57 2008: type: 3(MobileAnnounce) subtype: 0 version: 1 xid

: 13224 seq: 17332 len 116 flags 0

Wed Sep 17 15:54:57 2008: group id: aa7a4fec 6bf5225c d25d6e98 b17ac701

Wed Sep 17 15:54:57 2008: mobile MAC: 00:0b:7d:0f:38:75, IP: 0.0.0.0, instance

: 0

Wed Sep 17 15:54:57 2008: VLAN IP: 10.160.191.242, netmask: 255.255.255.0

Wed Sep 17 15:54:57 2008: Switch IP: 10.160.104.185

Wed Sep 17 15:54:57 2008: 00:0b:7d:0f:38:75 Ignoring Announce, client record for

not found

(uscy1wc-air011) show>mobility sum

Symmetric Mobility Tunneling (current) .......... Enabled

Symmetric Mobility Tunneling (after reboot) ..... Enabled

Mobility Protocol Port........................... 16666

Mobility Security Mode........................... Disabled

Default Mobility Domain.......................... BG

Mobility Keepalive interval...................... 10

Mobility Keepalive count......................... 3

Mobility Group members configured................ 3

Controllers configured in the Mobility Group

MAC Address IP Address Group Name Status

00:18:ba:49:ab:40 10.160.104.187 BG Control Path Down

00:1c:58:8a:b4:a0 10.160.104.185 BG Control Path Down

00:1e:be:7a:b8:c0 10.32.210.251 BG Up

(uscy1wc-air011) show>mobility stat

Global Mobility Statistics

Rx Errors .................................... 0

Tx Errors .................................... 0

Responses Retransmitted ...................... 0

Handoff Requests Received .................... 388

Handoff End Requests Received ................ 0

State Transitions Disallowed.................. 0

Resource Unavailable.......................... 0

Mobility Initiator Statistics

Handoff Requests Sent ........................ 0

Handoff Replies Received ..................... 0

Handoff as Local Received .................... 0

Handoff as Foreign Received .................. 0

Handoff Denys Received ....................... 0

Anchor Request Sent .......................... 0

Anchor Deny Received ......................... 0

Anchor Grant Received ........................ 0

Anchor Transfer Received ..................... 0

Mobility Responder Statistics

Handoff Requests Ignored ..................... 388

Ping Pong Handoff Requests Dropped ........... 0

--More-- or (q)uit

Handoff Requests Dropped ..................... 0

Handoff Requests Denied ...................... 0

Client Handoff as Local ...................... 0

Client Handoff as Foreign ................... 0

Client Handoff Inter-Group .................. 0

Anchor Requests Received ..................... 0

Anchor Requests Denied ....................... 0

Anchor Requests Granted ...................... 0

Anchor Transferred ........................... 0

(uscy1wc-air011) show>

Given what I see, I think that the anchor control is rejecting the requests for some

reason.

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Mobility Issues with Guest VLAN

WIreless can best be desribed as feature rich!! You have to smile and be polite to the WLC to work, its probably the WLC having a bad day lol

4 REPLIES
New Member

Re: Mobility Issues with Guest VLAN

LWAPP control is port 12222 and control is 12223. WOrth having a check that nothing has changed and comms is ok over these 2 ports

New Member

Re: Mobility Issues with Guest VLAN

Thanks, I'll give that a shot.

New Member

Re: Mobility Issues with Guest VLAN

I ended up removig the mobility configuration, and re-doing it. The only difference this time was I used the edit all function instead of the single entry at a time option, and everything came up without an issue. Probably just me.

New Member

Re: Mobility Issues with Guest VLAN

WIreless can best be desribed as feature rich!! You have to smile and be polite to the WLC to work, its probably the WLC having a bad day lol

342
Views
0
Helpful
4
Replies