Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

models with two independent antennas

Hello!Please help me to find a cisco wireless product that have two antennas modules on board which I can configure independently.I mean something like this:

#conf t

#int Dot11Radio0 0

and

#int Dot11Radio0 1

But I need that both can work on 2.4.Not one - 2.4 and another 5.0.

Thanks for any help.

p.s. I hope I said clear what I want.:(

3 REPLIES
Bronze

Re: models with two independent antennas

sergii

some old PROXIM/Lucent AP's had dual 2.4 radio capability. I am not aware of any Cisco products having that feature.

Bill

Re: models with two independent antennas

AFAIK all Cisco APs come with a single 2.4Ghz radio. Those that accept external antenna have two antenna stubs but this is for diversity not to allow you to connect two different antenna for different purposes, ie; you can't connect a directional antenna to one stub and an omni to the other.

New Member

Re: models with two independent antennas

I understood,thanks.I had a task to change mikrotik router to cisco.mikrotik have the two radio cards.its simple for mikrotikOS.

thanks again.

120
Views
0
Helpful
3
Replies
CreatePlease to create content