Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

MSE 7.4: HA heartbeat

Hello!

we have two 3355 7.4 MSE appliance in different locations.

They are in the same VLAN (L2 domain).

MSE1 is primary, MSE2 secondary.

  • MSE1  10.1.1.2
  • Virtual  10.1.1.1
  • MSE2   10.1.1.3

MSE1 and MSE2 can ping each other, but can't join in HA pair. MSE can also ping Virtual IP address. But, heartbeats are down.

after trying to add MSE2 to MSE1 from Prime GUI

(Services > Mobility Services Engines> System > Services High Availability > Current High Availability Status) it is ssen:

"Initial setup of high availability configuration has failed. Lost heartbeats with the Secondary. Will retry."

information from MSE2

[root@MSE2 ~]# /etc/init.d/msed status

STATUS:

Health Monitor is running

MSE services are down. This is a secondary server. Services will not be started

unless -

                * This secondary is paired with a primary and the primary is up

and synchronized with this secondary

                        OR

                * Associated primary server is down and this server is failing o

ver for it

[root@MSE2 ~]# gethainfo

Health Monitor is running. Retrieving HA related information

----------------------------------------------------

Base high availability configuration for this server

----------------------------------------------------

Server role: Secondary

Health Monitor IP Address: 10.1.1.3

Virtual IP Address: Not Applicable for a secondary

Version: 7.4.100.0

UDI: AIR-MSE-3355-K9:V01:XXXXX

Number of paired peers: 1

----------------------------

Peer configuration#: 1

----------------------------

Health Monitor IP Address 10.1.1.2

Virtual IP Address: 10.1.1.1

Version: 7.4.100.0

UDI: AIR-MSE-3355-K9:V01:YYYYYY

Failover type: Manual

Failback type: Manual

Failover wait time (seconds): 120

Instance database name: mseos3

Instance database port: 1524

Dataguard configuration name: dg_mse3

Primary database alias: mseop3s

Direct connect used: No

Heartbeat status: Down

Current state: SETUP_FAILED

There are no FW or ACL between two nodes.

Does anyone know, what can be the reason and how heartbeats can be troubleshooted?

2 REPLIES

MSE 7.4: HA heartbeat

Please check the HA limitations and guidelines, HA licensing. from the below link

http://www.cisco.com/en/US/docs/wireless/mse/3350/7.4/CAS_Configuration/Guide/7_4_MSE_CAS_chapter_0100.html

New Member

Hi Jaaazman777 .I have same

Hi Jaaazman777 .

I have same problem.

Can you say, did you solve problem?

Can you explain how ?

Thanks

681
Views
0
Helpful
2
Replies