05-06-2014 05:12 AM - edited 07-05-2021 12:46 AM
Hi guys.
As you know, in order to improve Wi-Fi location accuracy, we can apply our RF calibration model. I have a problem here, it is impossible to calibrate.
I'm using:
I have a client with Intel(R) Centrino(R) Advanced-N 6205 wireless card. This card is CCX capable and here is my client info on WLC:
However, when I go to Cisco Prime infrastructure, create a new RF calibration model, select the floor and click “Next”:
In the new page I see this error (but I already enabled S60 setting on the WLC via CLI):
Ok... let say we click "OK" here. Next, on this page I choose “Collection Method – Point” and click “Go” on the selected Calibration Point. The new error message appears:
So in this situation, I am not able to collect any calibration data in order to improve location accuracy.
Maybe I am missing something? Has anyone of you tested this?
11-04-2014 09:59 AM
I am having the same problem. You CONSEG solven???
11-05-2014 01:25 AM
Hi,
I have solved this problem. The problem was incorrect SNMP configuration between WLC and Cisco Prime Infrastructure. Please check Your SNMP configuration.
:)
11-05-2014 05:27 AM
Thank you, now, this working
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: