Step 2 Specify if you want the export format to be .csv (a file containing the MAC addresses of access points) or .pdf from the Export Format drop-down menu.
Step 3 Choose either the Save to File or E-mail To option as the destination type.
-If you select the Save to File option, a destination path must first be defined at the Administration > Settings > Report page. Enter the destination path for the files in the Repository Path field.
-If you select the E-mail to option, an SMTP Mail Server must be defined prior to entry of the target e-mail address. Choose Administrator > Settings > Mail Server to enter the appropriate information.
Step 4 Enter a start date (MM:DD:YYYY format) in the provided field or click the calendar icon to select a date. The report begins running on this date.
Step 5 Specify a start time using the hour and minute drop-down menus.
Step 6 Click on one of the recurrence buttons to select how often the report is run.
Step 7 When entry is complete, do one of the following:
â¢Click Save to save the entry.
â¢Click Save and Run to save the changes and run the report now. The report is run, and the results are either e-mailed or saved to a designated file as defined in the Schedule tab. The report runs again at the scheduled time.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...
I have created a Powershell script to automatically add a Wireless Guest
User on Cisco WLCs. (tested on 2500 Series) The script should be
completely self explanatory. Prerequisites: Powershell SNMP Module
(Install-Module -Name SNMP) SNMP Write Access to y...