Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multiple SSID configuring in autonomous AP 1242

Hi, Need to know whether VLAN definition is important for configuring multiple SSID in autonomous AP 1242. If Yes, then whether that VLAN need to be allowed in Switch port connect to this AP

6 REPLIES
Hall of Fame Super Red

Re: Multiple SSID configuring in autonomous AP 1242

Hi Gopinath,

VLANs on Aironet Access Points Configuration Example

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a0080665ceb.shtml

Hope this helps!

Rob

New Member

Re: Multiple SSID configuring in autonomous AP 1242

Hi Rob, yes, this is very useful link

Can you please let know is it very much necessary to create two different VLAN for creating multiple SSID, can't be on same VLAN ID?

Thanks

Hall of Fame Super Red
New Member

Re: Multiple SSID configuring in autonomous AP 1242

this helped me alot..thanks Rob

New Member

Re: Multiple SSID configuring in autonomous AP 1242

Hi, can BVI interface and SSID VLAN of multipe ssid can be on same ID?

New Member

Re: Multiple SSID configuring in autonomous AP 1242

BVI interface will always belong to Native Vlan, by default it VLAN 1, but you always could assign to different VLAN number, eable specify VLAN as native when creating it in the AP.

5532
Views
0
Helpful
6
Replies