Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Multiple VLANs mapped to single SSID on Flex 7500

Hi All,

I have to deploy Cisco Flex 7500 WLC with Cisco 1600 series APs at a customer site. There requirement is to map their existing VLANs to only single SSID. They have around 8 VLANs which are created according to the Active Directory Groups for users (Department wise). They require authentication from AD and they are using ISE 1.1 as RADIUS server. Also, customer's branch office APs will also be registered on this Centralised WLC.

Can anyone help me in acheving this goal?

Regards, Sohail

1 REPLY
VIP Purple

Multiple VLANs mapped to single SSID on Flex 7500

You should be able to use AAA-Override feature to give different vlan to each usergroup (based on AD-Grouping) still keeping the same SSID.

I think this feature support in FlexConnect from WLC software 7.2 onwards. See this CiscoLive material (page 47-50) for detail.

HTH

Rasika

**** Pls rate all useful responses ****

124
Views
0
Helpful
1
Replies