Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Need Help mesh

I have a few questions

1) how to config mesh network on standalone cisco ap using 5 ghz, just give me configs please

2) 802.11n feauter enabling command

thank you

  • Other Wireless - Mobility Subjects
Everyone's tags (2)
3 REPLIES
Cisco Employee

Need Help mesh

1>> Mesh network cannot be built using AUtonomous APs.. MESH is a different design..

The below link may help you

http://www.cisco.com/en/US/docs/wireless/technology/mesh/7.0/design/guide/MeshAP_70.html

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

Cisco Employee

Need Help mesh

2>> 802.11N runs on top og G and A and it alone cant drive..

Please mkae sure you are using below configs

WPA 2 Personal or WPA2 Enterprise with AES as the Encryption + WMM Enabled + All MCS rates enabled.

or

Open auth + no encryption + WMM Enabled + All MCS rates enabled.

Regards

Surendra

Need Help mesh

although mesh is not available with autonomous, you can use WGB if you want to bridge the communication with the wired side.

Rating useful replies is more useful than saying "Thank you"
876
Views
0
Helpful
3
Replies