Need HELP on BS-340 and Client Adapter 350 software setup
Got my CISCO base station working with my Aironet Client adapter 350 working except for the configuration.
All the setup/configuration software provide by CISCO dosen't seems to work. All new setting was unable to save and will revert back to its default setting once the system is restarts. The Client Encryption Manager default password(Cisco) is not working either. Currently I'm using Windows 2000. I hope someone out there can help me and tell me what went wrong.
Re: Need HELP on BS-340 and Client Adapter 350 software setup
Manage to get the software working. Now I had only have one problem left. How to save the client adapter parameters. Everytime my system is reboot, all setting for the client adapter is lost and had to be key in once again. Seems like clicking on the OK button will not work all the time. Does one setting(Windows 2000, Administrator Profile) for the client adapter works in other profile too?
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...