I have a client that is currently running 2 seperate WLANs. One is configured with 10 LWAPs connected back to a WLC 4400 using MAC Authentication. The other is 2 stand-alone 1200 Series APs configured with RADIUS to a MS IAS server.
The client would like to combine the seperate WLANs into 1; Effectively bringing all APs into the WLC, configuring RADIUS for all, and keeping the 2 current seperate SSIDs.
Is this possible using the 4400 Series? If so, Could you please direct me towards the guides for this setup.
1. Convert 1200 Series APs to LWAPs
2. Configure RADIUS on WLC 4400
3. Configure 2 seperate SSIDS on 1 WLC both using the same auth method
4. Modify RADIUS policys on MS Windows 2003 IAS if need be
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...