Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

need seemless connectivity to 'guest' wireless network

I need to set up our guest wireless network to allow users to connect without having to authenticate. I know that there is a global setting to allow a single username and pssword for everyone, but can it be set up to allow connections without any authentication at all?

1 ACCEPTED SOLUTION

Accepted Solutions

Re: need seemless connectivity to 'guest' wireless network

For webauth, there are three "modes".

1.) Authentication -  Username and password must be entered.

2.) Pass-through - Just need to click on the accept button. Gives you the ability to have no authentication but still show a disclaimer

3.) None - Completely open network, no disclaimer, no authenticaiton.

          In general, Pass-through might be the better option over completely open, just because you can put the disclaimer in.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
1 REPLY

Re: need seemless connectivity to 'guest' wireless network

For webauth, there are three "modes".

1.) Authentication -  Username and password must be entered.

2.) Pass-through - Just need to click on the accept button. Gives you the ability to have no authentication but still show a disclaimer

3.) None - Completely open network, no disclaimer, no authenticaiton.

          In general, Pass-through might be the better option over completely open, just because you can put the disclaimer in.

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
220
Views
0
Helpful
1
Replies
CreatePlease to create content