No Vlan migration using A-Radio Bridge on AP1242

[dofarrell]

I am using a 3560 on Root-Bridge side and a Cisco 2960 on the Workgroup Bridge side. Cannot migrate Vlan info to 2960 switch, thus cannot re-assign switchport access on a port to any VLAN other than the Native VLAN. Any way to make this happen without rebuilding the VLAN (VTP Database) on the Workgroup-Bridge side?

[bcolvin]

Dan

a little shy on details of the configuration for the AP's. you need to define an SSID for each vlan on each AP that you want to bridge including the Native vlan, Use the GUI for this, also the switch ports need to be configured for 1Q trunking.

this is kind of basic from my side also but using the GUI is pretty straight forward.

Bill