I have the following setup WLC 4402 version 22.214.171.124, 1010 Access points, Each access point's switch port is configured as a trunk along with the WLC's port. My WLAN for internal users works like a charm. MY WLAN for guest is not able to browse the web. I'm using Web Auth Internal with guest username and password.
Yes, I have the guest users on a seperate VLAN. I'm not even getting to the firewall. URLs are getting resolved by internal DNS servers so that part is working. I also have as part of the Internal WebAuth a redirect after login which is our company's website which is not working.
I've selected the correct interface name. I enabled web policy and authentication. I'm also using ACLs to keep them off my internal network. Could it be something with my ACL? I've followed the examples on CCO to setup my ACL.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...