In our current wireless infrastructure we have 3 wlc, 3wlan and about 100 ap (1130,1240).
Problem when I add new wlan I can see this wlan not on all ap, for example on the 6-th floor I can see my test wlan but not on the 4-th floor. This two ap have no Grop Name, I tested on one wlc and different.
Where can I look for to solve this problem? Thanks
How did you configure the new SSID? How many WLC did you configure this SSID? The APs that are not broadcasting the new SSID, can you check the WLC that the APs joined to and make sure the SSID has been configured?
I configured acording configuretion guide, jast default settings (In future I want this wlan for guest access). I configured all 3 wlc with the same settings. I have alredy confugured 3 another wlan and one of them is broadcasted by all APs -no problem, another same thing - some ap broadcasts some not.
Strange things, I compared wilan with working one - jast diffirent interfaces.
What can I check?
I rebooted all wlc and some non broadcasting ap -same thing
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...