Have you tried to confirm with a packet sniffer (e.g., Wireshark) or a logging ACL on an intermediate switch/router that the packets are actually leaving the WCS server?
If you can confirm that, then try to confirm again on the NB receiver that the packets are arriving (you could use Wireshark right on the HP server). These two tests will hopefully narrow the problem to one specific place (WCS, NB Receiver, or somwhere in between).
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...