Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Obtaining the SHA1 Key hash for an SSC from IOS for an Aironet 1230

I'd like to create a self-signed cert on an Aironet 1230. The problem is that I cannot find a command that will show that the SHA1 Key hash is for the new cert. Anyone know how to find this?

thanks in advance.

3 REPLIES
Hall of Fame Super Red

Re: Obtaining the SHA1 Key hash for an SSC from IOS for an Airon

Hi Steve,

Self-Signed Certificate Manual Addition to the Controller for LWAPP-Converted APs

http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a00806a426c.shtml

Hope this helps!

Rob

New Member

Re: Obtaining the SHA1 Key hash for an SSC from IOS for an Airon

Hi Rob,

I've read that, but it assumes that your using the Cisco Upgrade utility which determines the SHA1 hash from the key and inputs it into the WiSM. we have about 1000 (non-MIC) waps that need to be converted over and doing them 10 at a time is not going to cut it. Therefore I want to write a script that will do it for us 100 at a time. My last stumbling block is figuring out how to get the SSC's SHA1 key hash from the wap once the certs been created. IOS commands only seem to provide the MD5 hash.

Re: Obtaining the SHA1 Key hash for an SSC from IOS for an Airon

would this work?

show crypto pki certificates verbose | inc SHA1

Regards,

Roman

1624
Views
5
Helpful
3
Replies
CreatePlease login to create content