cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2022
Views
0
Helpful
3
Replies

oeap 600 - can't connect to corporate wlan

ivarhofseth
Level 1
Level 1

Hello!

I have some trouble with the setup of an oeap 600 ap.

The ap has joined the controller as it should and the remote-lan connection to my corporate network works well, but i can't connect to the corporate wlan.

When i check the event log on the ap it says:

"

*Oct 02 07:36:56.662: (Re)Assoc-Req from 00:1a:73:d2:82:8c forwarded to WLC, wired: no

*Oct 02 07:36:56.665: received assoc-rsp for wireless client, status=0011

*Oct 02 07:37:11.712: DisAssoc-Req/DeAUTH from 00:1a:73:d2:82:8c forwarded to WLC, wired: no

*Oct 02 07:37:11.713: WTP Event: Delete Mobile sent to wlc00:1a:73:d2:82:8c"

and a debug on the controller gives me:

apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Adding mobile

on LWAPP AP ec:c8:82:c2:3a:20(0)

*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Association received from mobile on AP ec:c8:82:c2:3a:20

*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Sending Assoc Response to station on BSSID ec:c8:82:c2:3a:20 (s

tatus 17) ApVapId 1 Slot 0

*spamApTask2: Oct 02 08:52:05.038: 00:1a:73:d2:82:7f Received Idle-Timeout from AP ec:c8:82:c2:3a:20, slot 0 for STA 00:

1a:73:d2:82:7f

*spamApTask2: Oct 02 08:52:05.038: 00:1a:73:d2:82:7f apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason

4, reasonCode 4

Does anyone have an idea?

thanks

3 Replies 3

ivarhofseth
Level 1
Level 1

problem solved. I had to turn off client load balancing on the wlan on the controller, and everything works  fine.

Hello,

For More information on OEAP-600, please watch the "Community Tech-Talk Series" Cisco Office Extend Access Point OEAP-600

https://supportforums.cisco.com/community/netpro/wireless-mobility/begin-wireless/blog/2012/02/24/cisco-office-extend-access-point-oeap-600

Thanks,

Vinay Sharma

Community Manager - Wireless

Thanks & Regards

Does the OEAP-600 support redundant WLC configuration. We have 2 WLC 5508 in the network and would like to take advantage of this redundancy.

Thanks,

Vikas

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: