Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

OEAP 602 with 2x Remote LAN Ports

Hello,

I know the limitations for an OEAP 602 AP with 1 x Remote LAN port:

"Only four clients can connect to an OEAP600 series through a RemoteLAn port".

My question is know if If I´m  using 2  Remote LAN ports can I thne use 4 clients per port or not ?

Thanks for help.

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Purple

OEAP 602 with 2x Remote LAN Ports

Hi Alex,

I think client limitation is per Remote LAN. If you want to use two ports as remote-lan you have to assign two different remote LAN for port#3 & port#4.

I haven't test the limit of client in each remote-lan. This post may help you how to configure this dual-remote lan feature on OEAP602

http://mrncciew.com/2013/03/11/oeap-with-multiple-remote-lans/

HTH

Rasika

**** Pls rate all useful responses ****

2 REPLIES
VIP Purple

OEAP 602 with 2x Remote LAN Ports

Hi Alex,

I think client limitation is per Remote LAN. If you want to use two ports as remote-lan you have to assign two different remote LAN for port#3 & port#4.

I haven't test the limit of client in each remote-lan. This post may help you how to configure this dual-remote lan feature on OEAP602

http://mrncciew.com/2013/03/11/oeap-with-multiple-remote-lans/

HTH

Rasika

**** Pls rate all useful responses ****

New Member

OEAP 602 with 2x Remote LAN Ports

Hi,

Thanks for your informations.

Regards

287
Views
0
Helpful
2
Replies
CreatePlease to create content