By default, a total of 12 clients can simultaneously associate to an LAP. Cisco does not recommend no more than 25 clients per LAP.
Just note that even though alot of people want to saturate a LAP with a significant number of clients, wireless is a large broadcast. The higher the number of clients are associated to ONE LAP, the slower the speed and bandwidth.
It gets even worst with CCTV when they transmit continuously to the LAP.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...