Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Option 43 question

My network has two different types of AP's, the 1130 and the 1242. I am using the Cisco switches to provide DHCP information to the AP's. If I read the directions correctly, I am supposed to use two different subnets for each model of AP?

Is that correct?

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: Option 43 question

I have 1131s and 1200 APs on the same subnet. Here is the doc I used to configure the option 43 in my DHCP server.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Table 1 shows you the VCI you need for the 1240

Scratch this I see you are using the switch for DHCP. Yeah you will have to create different pools for each type of AP. Sorry about that.

1 REPLY
New Member

Re: Option 43 question

I have 1131s and 1200 APs on the same subnet. Here is the doc I used to configure the option 43 in my DHCP server.

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808714fe.shtml

Table 1 shows you the VCI you need for the 1240

Scratch this I see you are using the switch for DHCP. Yeah you will have to create different pools for each type of AP. Sorry about that.

144
Views
0
Helpful
1
Replies