Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Packet to client, reached max retries

Hi all!

I have a problem what I can't resolve.

I have 5 c861W router, and I configured to use WDS. It works fine.

but in the log I see this messages:

Apr 16 08:47:12: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]

Apr 16 08:48:10: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****

Apr 16 08:48:10: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****

Apr 16 08:48:10: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client

Apr 16 08:49:10: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]

Apr 16 08:49:49: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****

Apr 16 08:49:49: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****

Apr 16 08:49:49: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client

I tried what guides suggested, I checked the carrier test but all of the channels on 1-10%. I tried to set non overlapping channels as far as i can, and set fragment-threshold to 1024.

I have no idea what is the problem. I thing channels aren't noisy. Not just one client do this, don't think it is a client problem.

Something is missconfigured?

here is a config sample:

interface Dot11Radio0

no ip address

no ip route-cache

encryption vlan 1 mode ciphers tkip

encryption vlan 100 mode ciphers tkip

ssid my_ssid

ssid my_ssid2

channel 2437

fragment-threshold 1024

station-role root

no dot11 extension aironet

!

any idea?

thank you!

1 ACCEPTED SOLUTION

Accepted Solutions
New Member
2 REPLIES
New Member
New Member

Re: Packet to client, reached max retries

Thank you!

I think it could resolve my problem.

I'm going to test it.

Gabor

1587
Views
0
Helpful
2
Replies