Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

'partially' overlapped 802.11b channels

Hi

Understand the channel design need to be 5 channels apart, but if they are 3 or 4 channels apart, what is the result?

assuming we are using channel 1,4,8

thanks

2 REPLIES
New Member

Re: 'partially' overlapped 802.11b channels

Use the Radio diagnosis tool to see the difference in the SNR using diffrent channel seperation.

We I tries to use fewer channel sepration in our environment the SNR was effected.

Therefore we use 1,6 & 11 and with proper site survey we reduce the radio power ( Watts) to reduce overlapping channels.

New Member

Re: 'partially' overlapped 802.11b channels

THanks! Thats a good answer.

too bad, our AP does not support adjusting the power, what else can we do to solve the overlapping problem beside playing with the channels?

115
Views
0
Helpful
2
Replies