Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Password Recovery WLC4402

How I can recover the password in a Wireless Lan Controllers 4402?

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: Password Recovery WLC4402

There is no password recovery option on the Wireless LAN Controller (WLC). You need to set the WLC to factory defaults and reconfigure it.

In order to set the WLC to factory defaults, power cycle the WLC, press ESC Key during the boot up process from the console and select last option(5) to clear the configuration and reboot the Wireless Lan Controller.

Note:The new default username and password is "admin".

http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cc09.html#wp1046716

2 REPLIES
Silver

Re: Password Recovery WLC4402

There is no password recovery option on the Wireless LAN Controller (WLC). You need to set the WLC to factory defaults and reconfigure it.

In order to set the WLC to factory defaults, power cycle the WLC, press ESC Key during the boot up process from the console and select last option(5) to clear the configuration and reboot the Wireless Lan Controller.

Note:The new default username and password is "admin".

http://www.cisco.com/en/US/products/ps6366/products_configuration_guide_chapter09186a008076cc09.html#wp1046716

New Member

Re: Password Recovery WLC4402

thanks

234
Views
0
Helpful
2
Replies