Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PCMCIA Card 340 with AP-350

Hi,

I have 2 CISCO PCMCIA Card 350 Series associated with an AP-350 ( 50 mW).

I have no problem with this configuration

But when I want to use an old CISCO PCMCIA Card 340 Series with AP-350.

The card is not Associated. The SSID is correct, and i have update the firmware .

Does anyone know if Card 340 Series is compatible with AP-350 (50 mW)

My PC is Windows XP PRO

Thanks for your help

2 REPLIES
New Member

Re: PCMCIA Card 340 with AP-350

Hi, I´ve used the Aironet 4800 Turbo DS Card and Symbol LA4121 with Cisco AP352 and it´s working perfect. I haven´t used RFC1042, in the AP, when using any client no Cisco but this is not your case. I suggest you to check wep and, if it´s possible, test with other ap.

Regards.

New Member

Re: PCMCIA Card 340 with AP-350

You may have WEP enabled on the AP but NOT on the PCM Card?

Also, if the card is a PCM340 it has no WEP support, if it is PCM341 it only has 40 bit WEP functionality, if it is PCM342 it has 128 bit WEP support and should be OK.

Check you WEP key settings on AP and cards.

Nick Howells Head of Solutions Sales - Collaboration STS (Structured Technology Services) T: 0116 240 8820 | D: 0116 240 8832 | M: 07764 710396 E: nickh@sts-communications.com | W: www.sts-communications.com
282
Views
0
Helpful
2
Replies
CreatePlease to create content