Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Point to multipoint with AP 1230AG

Hello,

I want to do this configuration:

Site A must be connected to site B and to site C. On the site A there is an AP 1230AG, it's configured in bridge mode in point to multipoint to site B and C in 802.11A.

On the site B there is an AP 1230AG, it's configured in bridge mode in point to point to the site A in 802.11A, and it's configured in access point in 802.11G for laptops.

On the site C there is an AP 1230AG, it's configured in bridge mode in point to point to the site A in 802.11A, and it's configured in access point in 802.11G for laptops.

I believe that it's possible to make bridge and access point on the same AP in point to point , but is it possible in point to multipoint with AP 1230AG?

Thanks and regards.

  • Other Wireless - Mobility Subjects
1 REPLY
Bronze

Re: Point to multipoint with AP 1230AG

As long as there are dual radios each radio can be configured as both as access point and brdige mode.

114
Views
0
Helpful
1
Replies
This widget could not be displayed.