Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Point to Multipoint WLAN Bridging (1310) CFG Examples

I've blown half a day looking for a rudimentary config example for a point to multipoint bridging design. Would like an example config for the 1310 root and 1310 non-root(a) and non-root(b). I hate to spend days developing this when I can stand on the shoulders of those who've died doing what they love before I came along. Any help AND url links would be appreciated.

2 REPLIES
New Member

Re: Point to Multipoint WLAN Bridging (1310) CFG Examples

Here are configs for the root and non-root. The only difference is setting the root to root and choosing a channel. The non-root do not get to choose a channel, only set them to non-root.

Here is the root config:

dot11 ssid Wireless

authentication open

authentication key-management wpa

infrastructure-ssid

wpa-psk ascii whateverkeyyouwant

!

!

!

username admin privilege 15 password setyourpasswordhere

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

encryption mode ciphers aes-ccm tkip

!

broadcast-key change 300

!

!

ssid Wireless

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

channel 2412

station-role root

cca 75

concatenation

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 80 in

!

interface BVI1

ip address 10.100.8.35 255.255.255.0

no ip route-cache

!

ip default-gateway 10.100.18.1

Here is the non-root config, it is the same for all remotes, you only need to change the IP address and host names.

hostname Remote

!

enable password setyourpassword

!

ip subnet-zero

!

!

no aaa new-model

!

dot11 ssid Wireless

authentication open

authentication key-management wpa

infrastructure-ssid

wpa-psk ascii whateverkeyyouwant

!

!

!

username admin privilege 15 password setyourpassword

!

bridge irb

!

!

interface Dot11Radio0

no ip address

no ip route-cache

!

encryption mode ciphers aes-ccm tkip

!

ssid Wireless

!

speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0

station-role non-root wireless-clients

cca 75

concatenation

infrastructure-client

bridge-group 1

bridge-group 1 spanning-disabled

!

interface FastEthernet0

no ip address

no ip route-cache

bridge-group 1

bridge-group 1 spanning-disabled

hold-queue 80 in

!

interface BVI1

ip address 10.100.8.36 255.255.255.0

no ip route-cache

!

ip default-gateway 10.100.8.1

New Member

Re: Point to Multipoint WLAN Bridging (1310) CFG Examples

Thanks. Didn't know if it would require different bridge groups for each root-to-nonroot connection. This looks simple enough. I noticed you made the station role of the non-root "wireless clients" as well. Is this feature to offer ap connectivity to clients behind the non-root? Thanks again.

451
Views
0
Helpful
2
Replies