Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Power-inline issue between v4.1.171.0 and IOS 12.1

Hi.

I just upgrade WiSMs & LAP 1131s to v4.1.171.0 from 4.0.206.0.

LAPs in Head Office are ok but some Branch Office LAPs are enabled, pingable, configurable but not operational.

Show power inline for the non-operational LAPs shows only 6.2W being consumed instead of the normal 12.2W by HO LAPs.

HO 3750s are running 12.2(35)SE1 along with BO 3750s with operational LAPs but non-operational LAPs are connected to 3750s running v12.1(19)EA1d.

Anyone know of known bugs, etc.

2 REPLIES
New Member

Re: Power-inline issue between v4.1.171.0 and IOS 12.1

Ah!

Select 'Pre-Standard State' for LAP on Controller. Also requires interface shut/no shut.

Why isn't this 'Power over Ethernet' options available in WCS?

New Member

Re: Power-inline issue between v4.1.171.0 and IOS 12.1

There's more on this in the 4.1.171 release notes along with some stuff about CDP and other things that are worth paging through.

I assume the WCS has been upgraded to the latest version as well? We're still working on ours.

206
Views
0
Helpful
2
Replies
CreatePlease to create content