Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PRIMARY SECONDARY TERTIARY WLC 5508 6.0.196

Hi,

i have a problem on the high disponibility. In fact my LAP 1242 connect the cisco-capwap-controller.localdomain for the first time but after it don't respect my primary registred on HIGH DISPONIBILITY.

Do you have an idea?

Thanks.

1 REPLY
Cisco Employee

Re: PRIMARY SECONDARY TERTIARY WLC 5508 6.0.196

Hi, you need to make sure that the primary WLC that you have configured on the AP is in fact replying to the discovery request

of the AP.

If the AP receives a discovery request from the WLC that is configured as a Primary then it will join it.

Some of the reasons for the AP no to join the primary are:

1- Wrong WLC name on the AP configuration

2- WLC doesn't reply to the discovery request of the AP

3- WLC is already full

4- AP is not getting authorized on the WLC and Authorization have been enabled for the APs on the WLC.

5- ....

Hope this helps

Serge

330
Views
0
Helpful
1
Replies
CreatePlease to create content