Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Printing through Wirless Network

Dear All,


i have the following problem ...


we have printers on local network 192.168.100.XXX ....<-- DHCP is disables


our Cisco Wirless LAN Controller is on different network 192.168.105.XXX .... <-- DHCP enabled


the wirless device is connected to the local network switch 192.168.100.2 so its having the same gateway as the local network.



How can I enable printing through wireless.


awaiting your prompt feedback guys.

6 REPLIES
Hall of Fame Super Gold

Re: Printing through Wirless Network

I'm no expert of the make and model of your printer but can your printer "print" from two different networks?  What wireless configurations have you done to the printer?

New Member

Re: Printing through Wirless Network

heey there ,,,


that's the problem am facing ... i have an HP Printer but no wireless option is there ...


but i was  thinking that since the two networks have the same GW ... there might be a way of allowing wireless users to print through local printers.



Hall of Fame Super Gold

Re: Printing through Wirless Network

I'm getting lost here.  Can you post your network diagram?

New Member

Re: Printing through Wirless Network

 


i hope this is clear ...


so can what configuration i have to enable any wirless user to print through local printers.


Printer doesn't have wireless !!


i am not trying to give you a hard time but i really need your help in this.

Hall of Fame Super Gold

Re: Printing through Wirless Network

You need to configure inter-VLAN routing on your 3560 switch.

Hall of Fame Super Silver

Re: Printing through Wirless Network

I agree with Leo.... if your 3560 has no L3 or you don't have routing configured to pass traffic from one subnet to another, your wireless users will be isolated from the rest of the network.  Maybe just put the wireless in the same subnet as the printers and switch and be done with it.

Nice colorful fonts:)

-Scott
*** Please rate helpful posts ***
358
Views
0
Helpful
6
Replies
CreatePlease to create content