Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

problem to connect to aironet 1240 via mobiles

I have an network with aironet 1240, I can't connect to wifi with my mobiles machine

event log  :
1 March 1 03:24:14.066 Information Interface Dot11Radio0 , Station 0010.3900.0ae7 Associated KEY_MGMT [ NONE ]
2 March 1 03:24:13.833 Warning Packet to customer 0010.3900.0ae7 Reached max retries , Removing the customer
3 March 1 03:24:13.829 Information Interface Dot11Radio0 , Deauthenticating Station 0010.3900.0ae7 Reason : Previous authentication no valid along
4 March 1 03:24:13.828 Warning Packet to customer 0010.3900.0ae7 Reached max retries , Removing the customer
in association the IP address is 0.0.0.0 but my devices  have a fixed IP address 10.10.2.24 
my config is:

!
! Last configuration change at 2:45:41 UTC Mon March 1, 1993
Version 15.2
no service pad
the service timestamps debug datetime msec
the service timestamps log datetime msec
the service password-encryption
!
hostname ap
!
!
logging rate -limit console 9
enable secret $ 5 $ 1 $ mJy0 vOeSPnGp6i1qle.aON.2r .
!
no aaa new -model
ip cef
!
!
!
dot11 syslog
dot11 vlan -name vlan 1 bechbech
!
dot11 ssid bechir
   vlan 1
   open authentication
   guest- fashion
   infrastructure - ssid optional
   ip redirection host 10.10.2.5
!
!
dot11 network -map
dot11 arp cache optional
dot11 priority -map AVVID
crypto pki token default removal timeout 0
!
!
Cisco username password 7 062506324F41
!
!
bridge irb
!
!
!
Dot11Radio0 interface
 no ip address
 !
 ssid bechir
 !
 antenna gain 0
 speed basic -1.0 2.0 5.5 11.0 6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0 m0 . m1 . m2 . m3 . m4 . m5 . m6 . m7 . m8 . m9 . m10 . m11 . m12 . m13 . m14 . m15 .
 power local client
 channel 2437
 station -role root
 dot11 dot11r pre -authentication over- air
 no dot11 extension aironet
 infrastructure -client
!
Dot11Radio0.1 interface
 encapsulation dot1Q 1 native
 bridge-group 1
 bridge-group 1 subscriber -loop -control
 bridge-group 1 spanning- disabled
 bridge-group 1-port - protected
 bridge-group 1 block -unknown- source
 no bridge-group 1 source -learning
 no bridge-group 1 unicast - flooding
!
GigabitEthernet0 interface
 no ip address
 half duplex
 auto speed
 no keepalive
!
GigabitEthernet0.1 interface
 encapsulation dot1Q 1 native
 bridge-group 1
 bridge-group 1 spanning- disabled
 no bridge-group 1 source -learning
!
BVI1 interface
 ip address 10.10.2.5 255.255.255.0
!
ip forward -protocol nd
ip http server
no ip http secure-server
ip http help- path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
ip access- list extended bbb
 permit ip any any
 permit ip any 0.0.0.5 255.255.255.0
!
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
 local login
 transport input all
!
end

thank you in advance

Everyone's tags (1)
4 REPLIES
Hall of Fame Super Gold

ip access- list extended bbb

ip access- list extended bbb
 permit ip any any
 permit ip any 0.0.0.5 255.255.255.0

Huh?  What is this ACL for???

 

Your configuration looks ... odd.  What exactly are you trying to do?

New Member

this is a default value, I

Hello Leo,

this is a default value, I changed nothing 
it is a local network of more mobile devices (do not support networks secured wpa, wep etc ...) that connects to a local server, all machine have IP Addresses 10.10.2.x ,I want that the access point accepts only machine that have 10.10.2.x Address 

what I need to change?
Here my need 
thank you for helping me 
1000 thanks :)

New Member

Hello Leo,this is a default

Hello Leo,

this is a default value, I changed nothing 
it is a local network of more mobile devices (do not support networks secured wpa, wep etc ...) that connects to a local server, all machine have IP Addresses 10.10.2.x ,I want that the access point accepts only machine that have 10.10.2.x Address 

what I need to change?
Here my need 
thank you for helping me 
1000 thanks :)

New Member

I think my problem is related

I think my problem is related to the decryption 
how fix it?

client status below:

79
Views
0
Helpful
4
Replies
CreatePlease login to create content