We have a problem with one of our customers , they have 2 wireless controllers + a WCS system. We tried to configure a guest WLAN but bounced on an authentication problem . ALthough the authentication has been configured ( in the WCS) as open authentication and no radius servers are configured the controllers still send the authentication requests to the radius server.
I checked the configuration on the controller and this is similar to the WCS.
Re: Problem with guest accounts + web authentication
If using login the controller first tries the controller based local database. It then will try to use the AAA server identified in the WLAN interface description. Finally, it will use the AAA server identified in the management interface description. If you choose not to do this then a workaround is to change the Web RADIUS authentication method for web auth in the controller tab of the WLC gui interface to a method not supported on your RADIUS server. For instance, set for MD5-CHAP if not supported on your ACS server.
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...
I have created a Powershell script to automatically add a Wireless Guest User on Cisco WLCs. (tested on 2500 Series)
The script should be completely self explanatory.
Powershell SNMP Module (Install-Module -Name SNMP)
SNMP Write Access to...