Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Problems with 5GHz WGB

Hi,

I have two 1242s making a 5GHz 'link/WGB' and then LWAPP access point behind the WGB. The link keeps losing connection every now and then. I debugged the WGB and the following log keeps popping up:

'parent lost: Received deauthenticate (2) not valid'

I changed the encryption to open and the problem is still there. The distance between APs is about 50m (160ft) and there is a line of sight. I have the latest IOS v.12.4.10b-JDA3(GD).

Any advice or clues how to solve this?

3 REPLIES
New Member

Re: Problems with 5GHz WGB

So you have 2 standalone APs configured as WGBs and they are connecting to your LAP access points? What are the RSSI of the WGBs? You can see this in ASSOCIATION.

Re: Problems with 5GHz WGB

Can the lwapp APs see the WGB on the rf side? If yes you are likely seeing an issue revolving around RLDP. RLDP may be temporarily attempting to contain the WGB bridge AP as the WLC might perceive it as a rogue on the wired network. If you see it as a rogue, set its state to know internal friendly.

New Member

Re: Problems with 5GHz WGB

Yes, that is correct. The other end is configured to access point (role) and the other as WGB. RSSI is around -65dBm and SNR +30dB, so there shouldn't be a problem with signal strenght.

dennisscholmes: I'll have to check that.

I'm busy with other work at the moment, but I'll continue solving this ASAP. Thanks for the help so far.

173
Views
0
Helpful
3
Replies