Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PS3 associate with UC520W Wifi

Recently I come this weird error when PS3 connect to UC520W Wifi.

PS3 version 2.53

UC520W IOS 12.4(22)T

Does anyone know what causing this and how can I solve it ?

000193: Dec 22 23:14:23.151: %DOT11-7-AUTH_FAILED: Station 00XX.XXXX.XXXX Authentication failed

000194: Dec 22 23:14:24.835: %DOT11-6-ASSOC: Interface Dot11Radio0/5/0, Station 00XX.XXXX.XXXX Associated SSID[MYSSID] AUTH_TYPE[OPEN] KEY_MGMT[WPAv2 PSK]

000195: Dec 22 23:14:34.659: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain

000196: Dec 22 23:14:34.659: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853CDAD0, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588

000197: Dec 22 23:14:34.659: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853D7A48, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801ADC20 0x801ADECC

000198: Dec 22 23:14:34.759: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain

000199: Dec 22 23:14:34.759: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853DB33C, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588

000200: Dec 22 23:14:34.759: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853D1790, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801ADE28 0x801ADDB8

000201: Dec 22 23:14:34.963: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain

000202: Dec 22 23:14:34.963: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C4E54, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588

000203: Dec 22 23:14:34.963: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C7BE4, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x8230B09C

000204: Dec 22 23:14:35.367: %IP_VFR-3-SYSTEM_ERROR: BVI1: IP VFR System failure - Unable to create fragment chain

000205: Dec 22 23:14:35.367: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C744C, count=0, -Traceback= 0x80F1D668 0x80205388 0x81D03BE8 0x81D04A40 0x81D05608 0x81D06EA8 0x813638F4 0x80B5F20C 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588

000206: Dec 22 23:14:35.367: %SYS-2-BADSHARE: Bad refcount in datagram_done, ptr=853C59B8, count=0, -Traceback= 0x80F1D668 0x80205388 0x8026A110 0x80B5F1D4 0x80B5F36C 0x802750A0 0x8091BB44 0x8091F37C 0x80906F70 0x809D6C58 0x801AC224 0x80026588 0x80026588 0x801AC2E4 0x801AFB44

000222: Dec 22 23:14:53.591: %DOT11-6-DISASSOC: Interface Dot11Radio0/5/0, Deauthenticating Station 00XX.XXXX.XXXX Reason: Sending station has left the BSS SSID[MYSSID]

3 REPLIES
Hall of Fame Super Silver

Re: PS3 associate with UC520W Wifi

Try setting up wpa-psk w/ tkip and see if that works.

-Scott
*** Please rate helpful posts ***
New Member

Re: PS3 associate with UC520W Wifi

No luck. still the same. Look like this maybe the PS3 firmware issue.

Re: PS3 associate with UC520W Wifi

Use nothing for encryption with mac filter and see if you can associate. Then move up to static wep. The PS probably doesn't respond quick enough for your controller. You might increase EAP timeouts from the cli.

214
Views
0
Helpful
3
Replies
CreatePlease to create content