Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

QOS Roles?

Hi

I'm looking to implement QOS roles for my guest traffic. I have a guest WLan with web auth, but the QOS role option does not appear under the wireless menu.  Wireless > QOS > Qos Roles.   So far I have  tried it on 2504, 4402, and on a Virtual WLC and none have the option.  I suspect this feature may be 5508 (or 7500) only.   Can anyone confirm this?

thanks

Rob                  

  • Other Wireless - Mobility Subjects
4 REPLIES
VIP Purple

QOS Roles?

No, this feature is there in 44xx,25xx & many other controllers. Below config guide says only 2106 it is not supported

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70ccfg.html#wpxref96780

If you follow the steps, you should find it.

HTH

Rasika

New Member

QOS Roles?

Yep

Been through the admin guide. The option is not avaiable from gui nor  the CLI on either the 2106, 2504, 4402 (running 7.0.116) nor on the CLI of  the Virtual WLC running version 7.4.

I have built Web  based authentication WLAN, and local guest user just in case they are require to make the option visible.

The options are not there on the CLI nor on the Wireless QOS option.

License? 5508?

need help

Rob

VIP Purple

QOS Roles?

Here is my 4402 (7.0.116.0) CLI, It is there.... Check it again.

(4402-3) >show sysinfo                    

Manufacturer's Name.............................. Cisco Systems Inc.

Product Name..................................... Cisco Controller

Product Version.................................. 7.0.116.0

RTOS Version..................................... 7.0.116.0

Bootloader Version............................... 7.0.116.0

Emergency Image Version.......................... 7.0.116.0

Build Type....................................... DATA + WPS

(4402-3) >show inventory

Burned-in MAC Address............................ 00:0B:85:43:D8:60

Crypto Accelerator 1............................. Absent

Crypto Accelerator 2............................. Absent

Power Supply 1................................... Absent

Power Supply 2................................... Present, OK

Maximum number of APs supported.................. 25

NAME: "Chassis"    , DESCR: "Cisco Wireless Controller"

PID: AIR-WLC4402-25-K9,  VID: V01,  SN: FLS1002H04M

(4402-3) >config netuser ?

add            Creates a local network user.

delete         Delete an existing network user.

description    Sets the description for a network user.

guest-lan-id   Configures a Wired guest LAN Id for a network user.

guest-role     Configures a Role for Guest User.

lifetime       Configures the lifetime for a Guest Network User. Valid range is 60 to 259200 seconds.

maxUserLogin   Configures the maximum number of login sessions allowed for a network user

password       Configures a password for a network user.

wlan-id        Configures a Wireless LAN Id for a network user

(4402-3) >config netuser guest-role ?

apply          Applies a Role to a Guest User.

create         Creates a new Guest Role.

delete         Deletes a Guest Role.

qos            Configures QoS parameters for a Guest Role.

QOS Roles?

260
Views
0
Helpful
4
Replies