We powered down our 4402 controller and moved it to a new UPS. After coming back up, only 24 of our 34 APs are associated. The ones that are not are associating but then being told by the controller to reboot due to "operator changed 11g mode".
<134>wcs01: *Oct 22 09:13:45.375: %LWAPP-6-REBOOT_INFO1: capwap_ac_sm.c:2367 Controller initiated reboot of AP 00:14:a9:6a:b0:60 that has currently joined the controller - (Reason: operator changed 11g mode) 184.108.40.206 22/10 09:13:46.090
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...