It's virtually impossible to calculate the coverage an AP will give. The only sure fire method is a site survey. If you have a Cisco PCMCIA wireless card you can use the site survey utility that comes with it for this purpose. Setup your AP and do some walk around testing, trying to guess or making assumptions will be a stab in the dark at best and you may well end up with holes in your coverage.
If you want a more comprehensive survey tool then there are some very powerful (and expensive) tools on the market.
Transferring Crash file from standby: Login to the Active WLC in HA.
From CLI: (Cisco Controller) >transfer upload datatype crash (Cisco
Controller) >transfer upload filename (Cisco
Controller) >transfer upload mode tftp (Cisco Controller) >transfer
This is the start of a display filter cross reference between Wireshark
and OmniPeek. The 1st installment is a table of advanced filters. More
filters will be added as time allows. It is a living doc, so check back
for changes every so often Please feel f...