I have a customer with 2 AP1141N AP's that are setup with MAC authentication. They experience random disconnects. The AP's have 2 different bootloaders on them. Both are running 12.4(25d)JA1 code, boot on one is 12.4(18a)JA3, the other 12.4(23c)JA1.
The clients dont reassociate on their own, they have to be manually reconnected.
I've noticed that the WAPs are 1141, which means that the clients are using 802.11b radio. Have you checked for channel interferrence?
What are the signal strengths of the clients as seen by the WAP (Command: sh dot11 associate )?
What is the signal strength of the WAP as seen by the client?
When you say disconnect, can you be more specific? When the client "disconnects" does ping drop? Or is the client claims of "disconnect" on the application level (cannot receive email BUT can still browse the web)?
< PRE >
(#)For this reason being that : - application that doesn't use multicast, sends one copy of each packet ( data unit of traffic at layer 3 ) to each client (" who seeks the traffic ).- application that does use multicast, sends ...
Transferring Crash file from standby:
Login to the Active WLC in HA.
(Cisco Controller) >transfer upload datatype crash
(Cisco Controller) >transfer upload filename <Desired filename>
(Cisco Controller) >transfer up...
This is the start of a display filter cross reference between Wireshark and OmniPeek.
The 1st installment is a table of advanced filters. More filters will be added as time allows.
It is a living doc, so check back for changes every so often
Please feel ...